Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

A novel synthetic route to 2-alkylpropane-1,3-sultones and its application to the synthesis of 2-alkyl derivatives of tramiprosate

A practical synthetic route to various 2-alkylpropane-1,3-sultones, the key intermediates for the preparation of 2-substituted homotaurines as analogs of tramiprosate, was developed.     

Effect of reduction treatment on copper modified activated carbons on NO(x) adsorption at room temperature

Activated carbon was impregnated with copper salt and then exposed to reductive environment using hydrazine hydrate or heat treatment under nitrogen at 925 °C. On the obtained samples, adsorption of NO(2) was carried out at dynamic conditions at ambient temperature. The adsorbents before and after exposure to nitrogen dioxide were characterized by X-ray diffraction (XRD), thermal analysis, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM-EDX), X-ray photoelectron spectroscopy (XPS), N(2)-sorption at -196 °C, and potentiometric titration. Copper loading improved the adsorption capacity of NO(2) as well as the retention of NO formed in the process of NO(2) reduction on the carbon surface. That improvement is linked to the presence of copper metal and its high dispersion on the surface. Even though both reduction methods lead to the reduction of copper, different reactions with the carbon surface take place. Heat treatment results in a significant percentage of metallic copper and a reduction of oxygen functional groups of the carbon matrix, whereas hydrazine, besides reduction of copper, leads to an incorporation of nitrogen. The results suggest that NO(2) mainly is converted to copper nitrates although the possibility to its reduction to N(2) is not ruled out. A high capacity on hydrazine treated samples is linked to the high dispersion of metallic copper on the surface of this carbon.     

Substituent effects in mass spectrometry—II. The effect of substituents on the dissociation of para and meta disubstituted benzenes

The effect of substituents on the activation energy for primary dissociation processes in the molecular ions of mono- and para and meta di-substituted benzenes has been examined. Where the daughter ion retains the substituent group, variation of the energy of activation derives from a combination of the effects of substituents on the ionisation potential of the molecular ion and the appearance potential of the daughter ion. An equation relating the energy of activation for the fragmentation of the molecular ion of a mono-substituted benzene to that of related para and meta di-substituted benzenes is presented.     

Cascade polycyclization: exploration of a convergent route to access various tricyclic and tetracyclic products related to sterols

The expedient synthesis of tricyclic and tetracyclic compounds via a cascade polycyclization methodology is described. Nazarov substrates (II) containing two Michael acceptors and a cyclohexenone ester (I) underwent cycloaddition followed by intramolecular 1,4-addition to furnish, in a highly stereoselective manner, tricyclic and tetracyclic products (III). Such compounds are interesting intermediates for the synthesis of polycyclic natural and unnatural products.     

Tuning the spin-transition properties of pyrene-decorated 2,6-bispyrazolylpyridine based Fe(II) complexes

Two 2,6-bispyrazolylpyridine ligands (bpp) were functionalized with pyrene moieties through linkers of different lengths. In the ligand 2,6-di(1H-pyrazol-1-yl)-4-(pyren-1-yl)pyridine (L1) the pyrene group is directly connected to the bpp moiety via a C-C single bond, while in the ligand 4-(2,6-di(1H-pyrazol-1-yl)pyridin-4-yl)benzyl-4-(pyren-1-yl)butanoate (L2) it is separated by a benzyl ester group involving a flexible butanoic chain. Subsequent complexation of Fe(II) salts revealed dramatic the influence of the nature of the pyrene substitution on the spin-transition behaviour of the resulting complexes. Thus, compound [Fe(L1)(2)](ClO(4))(2) (1) is blocked in its high spin state due to constraints caused by a strong intermolecular π-π stacking in its structure. On the other hand, the flexible chain of ligand L2 in compounds [Fe(L2)(2)](ClO(4))(2) (2) and [Fe(L2)(2)](BF(4))(2)·CH(3)CN·H(2)O (3) prevents structural constraints allowing for reversible spin transitions. Temperature-dependent studies of the photophysical properties of compound 3 do not reveal any obvious correlation between the fluorescence of the pyrene group and the spin state of the spin transition core.     

Embedded silver ions-containing liposomes in polyelectrolyte multilayers: cargos films for antibacterial agents

A new antibacterial coating made of poly(L-lysine)/hyaluronic acid (PLL/HA) multilayer films and liposome aggregates loaded with silver ions was designed. Liposomes filled with an AgNO 3 solution were first aggregated by the addition of PLL in solution. The obtained micrometer-sized aggregates were then deposited on a PLL/HA multilayer film, playing the role of a spacer with the support. Finally, HA/PLL/HA capping layers were deposited on top of the architecture to form a composite AgNO 3 coating. Release of encapsulated AgNO 3 from this composite coating was followed and triggered upon temperature increase over the transition temperature of vesicles, found to be equal to 34 degrees C. After determination of the minimal inhibitory concentration (MIC) of AgNO 3 in solution, the antibacterial activity of the AgNO 3 coating was investigated against Escherichia coli. A 4-log reduction in the number of viable E. coli cells was observed after contact for 120 min with a 120 ng/cm (2) AgNO 3 coating. In comparison, no bactericidal activity was found for PLL/HA films previously dipped in an AgNO 3 solution and for PLL/HA films with liposome aggregates containing no AgNO 3 solution. The strong bactericidal effect could be linked to the diffusion of silver ions out of the AgNO 3 coating, leading to an important bactericidal concentration close to the membrane of the bacteria. A simple method to prepare antibacterial coatings loaded with a high and controlled amount of AgNO 3 is therefore proposed. This procedure is far superior to that soaking AgNO 3 or Ag nanoparticles into a coating. In principle, other small bactericidal chemicals like antibiotics could be encapsulated by this method. This study opens a new route to modify surfaces with small solutes that are not permeating phospholipid membranes below the phase transition temperature.     

Characterisation of ethoxylated fatty chains of anionic surfactants and determination of residual ethoxylated fatty alcohols

Bachus et al. [1] recently described a new derivatisation method using 2-furoyl chloride for the characterisation of mixtures of polyethoxylated alcohols and their corresponding sulfates. This paper deals with the control of the derivatisation steps; hydrolysis and extraction conditions were optimised. The method is extended to the characterisation of alkyl sulfosuccinates, alkyl sulfoacetates and alkyl phosphates and to the analysis of residual polyethoxylated alcohols in surfactants. Extraction of non-ionic compounds using solid-phase extraction cartridges was performed before derivatisation. Residual amounts of alcohol were determined in five commercial anionic surfactants. Moreover, direct derivatisation without preliminary SPE in the same anionic surfactants proved to be efficient for dry samples.     

Dendrophanes: Water-soluble dendritic receptors as models for buried recognition sites in globular proteins

Water-soluble dendritic cyclophanes (dendrophanes) of first ( 1 , 4 ), second ( 2 5 ), and third generation ( 3 6 ) with poly(ether amide) branching and 12, 36, and 108 terminal carboxylate groups, respectively, were prepared by divergent synthesis, and their molecular recognition properties in aqueous solutions were investigated. Dendrophanes 1 – 3 incorporate as the initiator core a tetraoxa[6.1.6.1]paracyclophane 7 with a suitably sized cavity for inclusion complexation of benzene or naphthalene derivatives. The initiator core in 4 – 6 is the [6.1.6.1]cyclo-phane 8 shaped by two naphthyl(phenyl) methane units with a cavity suitable for steroid incorporation. The syntheses of 1 – 6 involved sequential peptide coupling to monomer 9 , followed by ester hydrolysis (Schemes 1 and 4), Purification by gel-permeation chromatography (GPC; Fig. 3) and full spectral characterization were accomplished at the stage of the intermediate poly(methyl carboxylates) 10 – 12 and 23 – 25 , respectively. The third-generation 108-ester 25 was also independently prepared by a semi-convergent synthetic strategy, starting from 4 (Scheme 5). All dendrophanes with terminal ester groups were obtained in pure form according to the ¹³C-NMR spectral criterion (Figs, 1 and 5). The MALDI-TOF mass spectra of the third-generation derivative 25 (mol. wt. 19328 D) displayed the molecular ion as base peak, accompanied by a series of ions [M – n(1041 ± 7)]⁺, tentatively assigned as characteristic fragment ions of the poly(ether amide) cascade. A similar fragmentation pattern was also observed in the spectra of other higher-generation poly(ether amide) dendrimers. Attempts to prepare monodisperse fourth-generation dendrophanes by divergent synthesis failed. ¹H-NMR and fluorescence binding titrations in basic aqueous buffer solutions showed that dendrophanes 1 – 3 complexed benzene and naphthalene derivatives, whereas 4 – 6 bound the steroid testosterone. Complexation occurred exclusively at the cavity-binding site of the central cyclophane core rather than in fluctuating voids in the dendritic branches, and the association strength was similar to that of the complexes formed by the initiator cores 7 and 8 , respectively (Tables 1 and 3). Fluorescence titrations with 6-(p-toluidino)naphthalene-2-sulfonate as fluorescent probe in aqueous buffer showed that the micropolarity at the cyclophane core in dendrophanes 1 - 3 becomes increasingly reduced with increasing size and density of the dendritic superstructure; the polarity at the core of the third-generation compound 3 is similar to that of EtOH (Table 2). Host-guest exchange kinetics were remarkably fast and, except for receptor 3 , the stabilities of all dendrophane complexes could be evaluated by ¹H-NMR titrations. The rapid complexation-decomplexation kinetics are explained by the specific attachment of the dendritic wedges to large, nanometer-sized cyclophane initiator cores, which generates apertures in the surrounding dendritic superstructure.     

Synthesis of trans-(3S)-amino-(4R)-alkyl- and -(4S)-aryl-piperidines via ring-closing metathesis reaction

[reaction: see text] trans-(3S)-Amino piperidines bearing various alkyl and aryl substituents at the C-4 position were synthesized via a ring-closing metathesis reaction. The absolute stereochemistry was controlled using a protected D-serine as a starting material. Stereoselective hydrogenation of allylamines provided trans-(3S)-amino-(4R)-alkyl- and -(4S)-aryl-piperidines. This procedure presents the first method for the asymmetric synthesis of 4-substituted 3-amino piperidines.